Facebook Twitter GooglePlus

Saşa electric S.R.L ®

  •  

 
Skip to content
  • About us
  • Products
    • ARDPEL40
  • Contact
ARDPEL40 Very easy to use! Self-regulating system High thermal transfer Excellent Yield: 99%

ARDPEL40

This is ARDPEL40, a pellet burner (wooden) 40kW fully automated.

Very easy to use!

Strikes by its simplicity. To start it you just need to push one button!

Self-regulating system

It has a wide power range capability: from 2 up to 40KW! Air and pellets are combined automatically so that the fire will always supply your heat requirements.

High thermal transfer

The fire resulting from the burning of pellets is directed downwards. Most energy resulting from this burning will not escape the chimney but it will be immediately consumed by the inner surface of the burner.

Excellent Yield: 99%

The injection of air on which the pellet supply is directly dependent makes combustion run almost perfectly. The usual ash is just a fine powder and the smoke nonexistent!

ARDPEL40



ARDPEL40 is a pellet burner (wooden) 40kW fully automated. The burner is mounted on solid fuel boilers.
Strikes by its simplicity and self-regulating system, being able to reduce power up to 2KW! It is a product that improves the quality of life and some of its advantages we present below.
Easy to use
 

Easy to use

"At the push of a button" should have a new definition, namely: ARDPEL40! Paper, wood shavings, smaller dry wood, even bigger, matches and maybe other elements necessary to the ignition of a fire are useless in the case of this burner. ARDPEL40 ignites and automatically maintains the fire and does not require any other command besides pressing ON!
Air injection
 

Air injection

Burning seems a simple process that only requires two elements: fuel and air. These elements are combined automatically so that the fire needs to be always right. The burner adjusts itself to meet the heat requirements.
Low heat losses
 

Low heat losses

The fire resulting from the burning of pellets is directed downwards. Most energy resulting from this burning will not escape the chimney but it will be immediately consumed by the inner surface of the burner. The temperature differences of this chimney compared to the usual combustion systems is at least 100°C.
Excellent Yield: 99%
 

Excellent Yield: 99%

The injection of air on which the pellet supply is directly dependent makes combustion run almost perfectly. The usual ash is just a fine powder and the smoke nonexistent! Therefore there are no deposits of soot (calamine), substance found in usual wooden burners. A millimeter of soot deposited inside the boiler reduces the yield by 10%!

Technical specifications

Bunker mass without pellets: 42kg
Burner mass: 23Kg
Types of accepted pellets: 6-8mm
TOUR temperature adjustable between: 50-80 ° C
Pellet burning Yield: about 99%
Heat transfer between the furnace and boiler: 70-90%
Power range settings: Continuous modulation between 40 and 2KW
Bunker capacity: 90kg (autonomy ranging between 2 to 7 days depending on the temperature)
Power supply: 230V / 50Hz
Power consumption: 30VA respectively 1500VA at ignition, about 2 minutes
Electrical protection class IP 40

DATA SHEET

INSTRUCTIONS FOR USE

Cost

1265 €
Complete kit including VAT, transport is not included

ARDPEL40 mounting (in RO)

Admin • September 16, 2015Video
0

ARDPEL40 burning fire

Admin • September 16, 2015Video
2

Comments and questions

Write a new entry for the Guestbook

 
 
 
 
 
 
 

Fields marked with * are required.
Your E-mail address won't be published.
For security reasons we save the IP address 18.206.92.240.
It's possible that your entry will only be visible in the guestbook after we reviewed it.
We reserve the right to edit, delete, or not publish entries.
(no entries yet)
© S.C. Sașa electric S.R.L. Toate drepturile rezervate.
Powered by Nirvana & WordPress.